Caddy® Mig C200i

The following items have been added to your list


Supporting the welder
Caddy® Mig C200i comes with a handy, ergonomic torch with a ball joint that decreases the stress on the welder´s wrist and helps the welder access the material in confined spaces.

Supportive internal design makes bobbin change quick and convenient. The side panel under which the built-in bobbin holder is found can stay open both when the machine is in upright position and when in lying position, making the bobbin easy to access.

The unit comprises a rubber surface for storage and putting aside of loose items such as wear parts and tools.

For tradesmen – repair, maintenance and assembly welding of mild steels, aluminium and stainless steels as well as brazing. This easy to use, intelligent and powerful unit offers excellent welding properties and is easy to take along to the job at hand.

Great if you are welding in the workshop or on the move.

Offering true portability
Not only is Caddy® Mig C200i small and of low weight. Thanks to its intelligent, compact design it is easy to
take along to different indoor and outdoor worksites and also to tuck away when not used, making it handy both in the workshop and on the move. Torch fastening and built-in grooves for cables facilitate transportation.
Polarity change enables usage of gasless cored (self-shield) wire, making the welder independent of gas tubes as well as wind conditions.

Single phase mains connection makes it easy to find an electricity supply for the unit, and it works equally well when powered by a portable generator. *

Thanks to the built-in PFC circuit, Caddy® Mig C200i can operate with extra long mains cables, over 100 m, giving the welder a very large working radius.

Impact resistant design
Composite materials in combination with smart design solutions provide a durable and impact resistant machine, adapted to rough conditions. The control panel is recessed, which provides additional protection and durability.

Improving the weld quality
Set the plate thickness, test weld for a few seconds and the unit will automatically set and maintain the best welding arc. Qset provides easy machine setting and ensures consistent quality and ease of operation. Conventional setting of wire feed speed and voltage is also possible.

Caddy® Mig C200i can be used for MIG brazing, making it possible assemble galvanized sheet metals and thermo sensitive materials.




  • Can weld mild & stainless steels, aluminium, as well as MIG/MAG brazing
  • QSet, intelligent arc setting, ensures consistent quality and makes it easy to use
  • Has PFC (power factor correction) and complies to European Harmonics demands = uses energy efficiently – lots of power.
  • Easy to change polarity = possibility to use gasless cored wire
  • Fitted with ESAB, high quality, MXL180 torch, 3 m long


Dimensions 449 x 198 x 347 mm


Description or Qualifier w/torches & cables
Weight 11.5 kg

Power Specifications

Current Range(A) 30-200 A
Efficiency at Maximum Current 82 %
Max Output (A) 200 A
Open Circuit Voltage 15 V
Power Factor at Maximum Current 0.99
Protection Class IP23C

Wire Feeder Specifications

Max Spool Diameter 200 mm
Wire Feed Speed 2 - 12 m/min
Wire Spool Capacity 5 kg

Fuse Specifications

Fuse Slow - Amps 16 A

Welding Output

Welding Output 180 A/23VDC @ 25%
100 A/19VDC @ 100%

Input Voltage

Frequency 50/60 Hz
Phase 1
Voltage 230 (± 15%) V


Application Classification S
MCableX 3 x 2.5
Operating Temp -10 - +40 °C
Standards IEC/EN 60974-1; 60974-5; EN 60974-10

Part Numbers and Accessories

Part Numbers : Caddy® Mig C200i
Accessories : Caddy® Mig C200i
35UE084630 Find a distributor
0700200105 Find a distributor
0700200063 Find a distributor
1251064600 Find a distributor
1251084600 Find a distributor
1251104600 Find a distributor
1930084600 Find a distributor
1816104620 Find a distributor
0700200091 Find a distributor
0700200085 Find a distributor
0700200087 Find a distributor
0459366887 Find a distributor