OK 67.13
Austenitic stainless steel electrode for welding 25Cr20Ni steels. The weld metal does not contain any measureable ferrite and resists scaling up to 1100-1150 °C.
Typical Charpy V-Notch Properties
| as welded aws | ||||
| as welded iso | ||||
Typical Tensile Properties
| Condition | Elongation | Shielding Gas | Tensile Strength | Yield Strength |
| As Welded | 35 % | AWS | 600 MPa (87 ksi) | 430 MPa (62 ksi) |
Deposition Data
| Current | Deposition Rate @ 90% I max | Diameter | Deposition Efficiency (%) | Number of electrodes/kg weld metal | Voltage | |
| 50-85 A | 42 sec | 0.8 kg/h (1.8 lb/h) | 2.5 x 300.0 mm (0.098 x 11.8 in.) | 51 % | 101 | 21 V |
| 65-120 A | 58 sec | 1.2 kg/h (2.6 lb/h) | 3.2 x 350.0 mm (1/8 x 13.8 in.) | 51 % | 53 | 24 V |
| 70-160 A | 61 sec | 1.7 kg/h (3.7 lb/h) | 4.0 x 350.0 mm (5/32 x 13.8 in.) | 51 % | 34 | 28 V |
| 150-220 A | 67 sec | 2.6 kg/h (5.7 lb/h) | 5.0 x 350.0 mm (0.197 x 13.8 in.) | 54 % | 21 | 31 V |
Classifications
| Classifications |
EN ISO 3581-A : E 25 20 R 1 2 SFA/AWS A5.4 : E310-16 Werkstoffnummer : 1.4842 |
Approvals
| Grade | EN 13479 |
| Society | CE |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Austenitic CrNi |
| Coating Type | Basic Rutile |
| Ferrite Content | FN 0 |
| Welding Current | DC+, AC |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Cr | Mn | Ni | Si | ||||||||||
| 0.12 % | 25.6 % | 1.9 % | 21.1 % | 0.6 % | ||||||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.