Dual Shield 710X-M
Dual Shield 710X-M provides outstanding operator appeal with an easily controlled arc, improved operation at both lower and higher current levels, minimal spatter and easily removed slag. Dual Shield 710X-M is designed to be used with 75/25 Argon CO2 gas mix.
Industries
- Barges
- Civil Construction
- Industrial and General Fabrication
- Railcars
- Ship/Barge Building
- Light Equipment
Welding Process
- FCAW (Flux Core)
Typical Charpy V-Notch Properties
| as welded 75% ar - 25% co2 | ||||
Typical Tensile Properties
| Condition | Elongation | Shielding Gas | Tensile Strength | Yield Strength |
| As Welded | 29 % | 75% Ar - 25% CO2 | 570 MPa (83 ksi) | 510 MPa (74 ksi) |
Deposition Data
| Current | Deposition Rate | Diameter | Deposition Efficiency (%) | TTW Dist. | Voltage | Wire Feed Speed |
| 75% Ar - 25% CO2 | ||||||
| 290 A | 4.05 kg/h (8.92 lb/h) | 1.2 mm (.045 in.) | 87 % | 25.4 mm (1 in.) | 1143 cm/min (450 in./min) | |
| 270 A | 3.70 kg/h (8.17 lb/h) | 1.2 mm (.045 in.) | 87 % | 25.4 mm (1 in.) | 29 V | 1016 cm/min (400 in./min) |
| 250 A | 3.21 kg/h (7.08 lb/h) | 1.2 mm (.045 in.) | 86 % | 25.4 mm (1 in.) | 29 V | 889 cm/min (350 in./min) |
| 230 A | 2.66 kg/h (5.86 lb/h) | 1.2 mm (.045 in.) | 84 % | 19 mm (3/4 in.) | 27 V | 762 cm/min (300 in./min) |
| 210 A | 2.22 kg/h (4.90 lb/h) | 1.2 mm (.045 in.) | 86 % | 19 mm (3/4 in.) | 27 V | 635 cm/min (250 in./min) |
| 190 A | 1.75 kg/h (3.85 lb/h) | 1.2 mm (.045 in.) | 85.5 % | 12.7 mm (1/2 in.) | 26 V | 508 cm/min (200 in./min) |
| 150 A | 1.28 kg/h (2.82 lb/h) | 1.2 mm (.045 in.) | 79 % | 12.7 mm (1/2 in.) | 26 V | 381 cm/min (150 in./min) |
| 370 A | 5.55 kg/h (12.23 lb/h) | 1.4 mm (.052 in.) | 86 % | 25.4 mm (1 in.) | 32 V | 1270 cm/min (500 in./min) |
| 360 A | 5.01 kg/h (11.05 lb/h) | 1.4 mm (.052 in.) | 87 % | 25.4 mm (1 in.) | 32 V | 1143 cm/min (450 in./min) |
| 350 A | 4.44 kg/h (9.80 lb/h) | 1.4 mm (.052 in.) | 86 % | 25.4 mm (1 in.) | 32 V | 1016 cm/min (400 in./min) |
| 340 A | 3.92 kg/h (8.65 lb/h) | 1.4 mm (.052 in.) | 86 % | 19 mm (3/4 in.) | 30 V | 889 cm/min (350 in./min) |
| 310 A | 3.33 kg/h (7.35 lb/h) | 1.4 mm (.052 in.) | 86 % | 19 mm (3/4 in.) | 30 V | 762 cm/min (300 in./min) |
| 260 A | 2.72 kg/h (6.00 lb/h) | 1.4 mm (.052 in.) | 86 % | 19 mm (3/4 in.) | 30 V | 635 cm/min (250 in./min) |
| 220 A | 2.20 kg/h (4.86 lb/h) | 1.4 mm (.052 in.) | 84.5 % | 15.8 mm (5/8 in.) | 28 V | 508 cm/min (200 in./min) |
| 190 A | 1.66 kg/h (3.66 lb/h) | 1.4 mm (.052 in.) | 83 % | 15.8 mm (5/8 in.) | 28 V | 381 cm/min (150 in./min) |
| 480 A | 7.33 kg/h (16.17 lb/h) | 1.6 mm (1/16 in.) | 87 % | 31.75 mm (1 1/4 in.) | 32 V | 1143 cm/min (450 in./min) |
| 430 A | 6.49 kg/h (14.33 lb/h) | 1.6 mm (1/16 in.) | 87 % | 31.75 mm (1 1/4 in.) | 32 V | 1016 cm/min (400 in./min) |
| 420 A | 5.72 kg/h (12.63 lb/h) | 1.6 mm (1/16 in.) | 86.5 % | 31.75 mm (1 1/4 in.) | 32 V | 889 cm/min (350 in./min) |
| 360 A | 4.85 kg/h (10.70 lb/h) | 1.6 mm (1/16 in.) | 86 % | 25.4 mm (1 in.) | 30 V | 635 cm/min (250 in./min) |
| 360 A | 4.04 kg/h (8.90 lb/h) | 1.6 mm (1/16 in.) | 86 % | 25.4 mm (1 in.) | 30 V | 635 cm/min (250 in./min) |
| 300 A | 3.21 kg/h (7.08 lb/h) | 1.6 mm (1/16 in.) | 85.5 % | 19 mm (3/4 in.) | 28 V | 508 cm/min (200 in./min) |
| 250 A | 2.37 kg/h (5.23 lb/h) | 1.6 mm (1/16 in.) | 85 % | 19 mm (3/4 in.) | 28 V | 381 cm/min (150 in./min) |
Classifications
| Classifications |
ASME SFA 5.36 : ASME SFA 5.20 : AWS A5.36 : E71T1-M21A4-CS1-DH8 AWS A5.20 : E71T-1MD-H8/T-9MD-H8 |
Approvals
| Approvals |
ABS CWB CSA W48 E491T-9M-H8 DNV-GL LR MIL-E-24403A 71T-1M Seismic Certified "D" |
| Approvals are based on factory location. Please contact ESAB for more information. |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Mn | P | S | Si | ||||||||||
| 75% Ar - 25% CO2 | ||||||||||||||
| 0.04 % | 1.3 % | 0.012 % | 0.008 % | 0.5 % | ||||||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.