ESAB 71
ESAB 71 is a general purpose, all-position flux cored wire and can be used with either, 100% CO2 or 75% Ar/25% CO2 shielding gas.
Industries
- Civil Construction
- Industrial and General Fabrication
- Mobile Equipment
- Railcars
- Ship and Offshore Yards
Typical Charpy V-Notch Properties
| 100% co2 | ||||
| 75% ar - 25% co2 | ||||
Typical Tensile Properties
| Shielding Gas | 100% CO2 | 75% Ar - 25% CO2 |
| Tensile Strength | 570 MPa (83 ksi) | 585 MPa (85 ksi) |
| Yield Strength | 505 MPa (73 ksi) | 525 MPa (76 ksi) |
| Elongation | 26 % | 26 % |
Deposition Data
| Current | Deposition Rate | Diameter | Deposition Efficiency (%) | Voltage | Wire Feed Speed |
| 100% CO2 | |||||
| 450 A | 8.0 kg/h (17.6 lb/h) | 1.6 mm (1/16 in.) | 84.9 % | 31 V | 1219 cm/min (480 in./min) |
| 411 A | 7.0 kg/h (15.4 lb/h) | 1.6 mm (1/16 in.) | 84.9 % | 29 V | 1067 cm/min (420 in./min) |
| 384 A | 6.4 kg/h (14.0 lb/h) | 1.6 mm (1/16 in.) | 84.9 % | 28 V | 965 cm/min (380 in./min) |
| 340 A | 5.4 kg/h (11.8 lb/h) | 1.6 mm (1/16 in.) | 84.8 % | 27 V | 813 cm/min (320 in./min) |
| 309 A | 4.7 kg/h (10.3 lb/h) | 1.6 mm (1/16 in.) | 84.8 % | 26 V | 711 cm/min (280 in./min) |
| 209 A | 2.7 kg/h (5.9 lb/h) | 1.6 mm (1/16 in.) | 84.7 % | 24 V | 406 cm/min (160 in./min) |
| 377 A | 7.0 kg/h (15.5 lb/h) | 1.4 mm (.052 in.) | 89.9 % | 30 V | 1473 cm/min (580 in./min) |
| 346 A | 5.9 kg/h (13.0 lb/h) | 1.4 mm (.052 in.) | 87.2 % | 28 V | 1245 cm/min (490 in./min) |
| 306 A | 4.8 kg/h (10.5 lb/h) | 1.4 mm (.052 in.) | 84.5 % | 27 V | 1016 cm/min (400 in./min) |
| 258 A | 3.6 kg/h (8.0 lb/h) | 1.4 mm (.052 in.) | 81.8 % | 26 V | 787 cm/min (310 in./min) |
| 188 A | 2.2 kg/h (4.9 lb/h) | 1.4 mm (.052 in.) | 78.5 % | 24 V | 508 cm/min (200 in./min) |
| 160 A | 1.7 kg/h (3.8 lb/h) | 1.4 mm (.052 in.) | 77.3 % | 24 V | 406 cm/min (160 in./min) |
| 309 A | 5.1 kg/h (11.2 lb/h) | 1.2 mm (.045 in.) | 89.9 % | 30 V | 1473 cm/min (580 in./min) |
| 274 A | 4.3 kg/h (9.4 lb/h) | 1.2 mm (.045 in.) | 87.2 % | 29 V | 1245 cm/min (490 in./min) |
| 237 A | 3.4 kg/h (7.6 lb/h) | 1.2 mm (.045 in.) | 84.5 % | 27 V | 1016 cm/min (400 in./min) |
| 196 A | 2.6 kg/h (5.7 lb/h) | 1.2 mm (.045 in.) | 81.8 % | 26 V | 787 cm/min (310 in./min) |
| 152 A | 1.8 kg/h (3.9 lb/h) | 1.2 mm (.045 in.) | 79.1 % | 24 V | 559 cm/min (220 in./min) |
Classifications
| Classifications |
AWS A5.36 : E71T1-M21A2-CS1 AWS A5.36 : E71T1-C1A2-CS1 AWS A5.20 : E71T-1C/T-1M/T-9C/T-9M ASME SFA 5.36 : ASME SFA 5.20 : |
Approvals
| Approvals |
ABS 3YSA CWB |
| Approvals are based on factory location. Please contact ESAB for more information. |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Mn | P | S | Si | ||||||||||
| 100% CO2 | ||||||||||||||
| 0.02 % | 1.3 % | 0.010 % | 0.013 % | 0.5 % | ||||||||||
| 75% Ar - 25% CO2 | ||||||||||||||
| 0.03 % | 1.6 % | 0.010 % | 0.012 % | 0.6 % | ||||||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.