OK Autrod 316LSi
A continuous solid corrosion resisting chroumium-nickel-molybdenium wire for welding of austenitic stainless alloys of 18% Cr - 8% Ni and 18% Cr - 10% Ni - 3% Mo types. OK Autrod 316LSi has a good general corrosion resistance, in particularly the alloy has very good resistance against corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly recommended where there is a risc of intergranular corrosion. The higher silicon content improves the welding properties, such as wetting. The alloy is widely used in the chemical and food processing industries as well as in ship building and various types of architectural structures.
Typical Charpy V-Notch Properties
as welded | ||||
Typical Tensile Properties
Condition | As Welded | As Welded |
Shielding Gas | Tested at 350°C. | |
Tensile Strength | 560 MPa (81 ksi) | 440 MPa (64 ksi) |
Yield Strength | 400 MPa (58 ksi) | 340 MPa (49 ksi) |
Elongation | 37 % | 26 % |
Recommended Welding Parameters
Wire Diameter | ||||
0.6 mm (0.025 in.) | ||||
1.14 mm (0.045 in.) |
Deposition Data
Current | Deposition Rate | Diameter | Voltage | Wire Feed Speed |
55-160 A | 1.0-4.1 kg/h (2.2-9.0 lb/h) | 0.8 mm (0.030 in.) | 12-24 V | 4.0-17.0 m/min (157-669 in./min) |
80-240 A | 1.5-6.0 kg/h (3.3-13. lb/h) | 1.0 mm (0.040 in.) | 15-28 V | 4.0-16.0 m/min (157-630 in./min) |
100-300 A | 1.6-7.5 kg/h (3.5-16. lb/h) | 1.2 mm (0.047 in.) | 15-29 V | 3.0-14.0 m/min (118-551 in./min) |
65-220 A | 1.1-5.4 kg/h (2.4-11. lb/h) | 0.9 mm (0.035 in.) | 15-28 V | 3.5-18.0 m/min (138-709 in./min) |
230-375 A | 5.2-8.6 kg/h (11.5-19. lb/h) | 1.6 mm (1/16 in.) | 23-31 V | 5.5-9.0 m/min (217-354 in./min) |
Classifications
Wire Electrode |
SFA/AWS A5.9 : ER316LSi Werkstoffnummer : ~1.4430 EN ISO 14343-A : G 19 12 3 L Si |
Approvals
Approvals |
CE EN 13479 CWB ER316LSi DB 43.039.05 DNV-GL VL 316 L (M13) NAKS/HAKC 0.8-1.2 mm VdTÜV 04268 |
Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
Alloy Type | Austenitic (with approx. 8 % ferrite) 19% Cr - 12% Ni - 3% Mo - Low C - High Si |
Shielding Gas | M12, M13 (EN ISO 14175) |
Typical Weld Metal Analysis %
Typical Weld Metal Analysis % | ||||||||||||||
C | Cr | Cu | Mn | Mo | Ni | P | S | Si | ||||||
0.02 % | 18.5 % | 0.1 % | 1.8 % | 2.7 % | 12 % | 0.015 % | 0.015 % | 0.8 % | ||||||
Typical Wire Composition % | ||||||||||||||
0.01 % | 18.4 % | 0.12 % | 1.8 % | 2.60 % | 12.2 % | - | - | 0.9 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.