OK Tigrod NiCrMo-3
Bare corrosion and heat-resisting Ni-Cr-Mo rods for welding of high alloyed heat-resisting and corrosion resisting materials, 9%Ni-steels and similar steels with high notch toughness at low temperatures. Also for joining of dissimilar metals of the types mentioned. The weld metal has very good mechanical properties at high and low temperatures. Good resistance to pitting and stress corrosion.
Typical Charpy V-Notch Properties
| As Welded | |
| Impact Value | 74 ft-lb |
| Impact Value | 100 J |
| Testing Temperature | -321 °F |
| Testing Temperature | -196 °C |
Typical Tensile Properties
| Condition | Elongation | Tensile Strength | Yield Strength |
| As Welded | 40 % | 780 MPa (113 ksi) | 550 MPa (80 ksi) |
Classifications
| Wire Electrode |
SFA/AWS A5.14 : ERNiCrMo-3 EN ISO 18274 : S Ni 6625 |
Approvals
| Approvals |
CE EN 13749 DNV-GL 2.4 mm NAKS/HAKC 2.0-2.4 mm VdTÜV 12460 |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Alloyed nickel (Ni + 22 % Cr + 9 % Mo - 3.5 % Nb) |
| Shielding Gas | I1, I3, R1 (EN ISO 14175) |
Typical Weld Metal Analysis %
| Typical Wire Composition % | ||||||||||||||
| C | Cr | Fe | Mn | Mo | Nb+Ta | Ni | Si | |||||||
| 0.02 % | 22.7 % | 0.3 % | 0.04 % | 8.6 % | 3.5 % | bal % | 0.06 % | |||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.